Pros looking for durability and dependability choose the Fisher XBLADE™snowplow. With exclusive X-Bracing and premium stainless steel moldboard, you simply can’t find a commercial snowplow built tougher than this.
The blade is a full 31” high for plowing through the deepest snows.
Available in 7 ½’, 8’, 8 ½’ and 9’ blade sizes, the XBLADE moldboard is built of premium corrosion-resistant stainless steel, for a plow that’s as rugged as it is striking, for the ultimate in durability and performance that hardworking professionals demand.
The polyethylene moldboard option on the 8’ and 9’ blade widths is bolted to the top frame with stainless steel fasteners and is mechanically interlocked on the bottom to a powder coated steel structure for a truly rust-free snowplow blade. Snow easily rolls off its slick surface for added snowplowing efficiency.
Exclusive X-BRACING features two vertical and eight diagonal ribs – unsurpassed in the industry – for providing superior torsional strength and rigidity to eliminate moldboard stress.
With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range.
In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.
Instead of relying on outside suppliers, we build all our hydraulics ourselves, for unmatched speed and durability. Fast responsive hydraulics maximize snowplowing efficiency.
The industry’s best protection against wear and rust. With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. We’ve added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance. Plus our trademark FISHER® yellow finish is reformulated to maintain that new snowplow look even longer.
Attack Angle & Curl
The XBLADE features an extreme 75 degree attack angle – more aggressive than any other straight blade – for exceptional ice breaking and scraping.
The blade curls to a full 10” overhang for optimum snow rolling and foiling action, to keep snow off the windshield.
Double Angle Base Angle
The extreme double angle base angle design provides superior strength and rigidity to eliminate stress on the blade.
1” base angle pins provide added strength for a longer life, and the high carbon steel wear pads provide the longest cutting edge wear of any on the market.
See a video about all the features of the Fisher XBLADE Snowplow. featuring the Minute Mount® 2 System
Specifications
for Fisher XBLADE Series Snowplow.
Blade Width
Blade Height
Gauge
Trip Springs
Ribs
Angling Rams
Plowing Width (Full Angle)
Approx. Weight (Complete)*
Wear Shoes (Cast Iron)
Cutting Edge
7' 6"
31"
14
4
10
1 1/2" x 12"
6' 7"
742 lbs.
Optional
1/2" x 6"
8'
31"
12**
4
10
1 1/2" x 12"
7' 1"
790 lbs.
Optional
1/2" x 6"
8' 6"
31
12
4
10
1 1/2" x 12"
7' 6"
813 lbs.
Optional
1/2" x 6"
9'
31"
12**
4
10
1 1/2" x 12"
7' 11"
835 lbs.
Optional
1/2" x 6"
* Plus Vehicle Mount – Average 60 lbs.
** Available with stainless steel or ¼ Polyethylene moldboards
