Fisher Snowplows
and Spreaders

Sales, Service, Parts, & Accessories
Route 5 Bellows Falls Vt.

800-639-2037
802-463-3300

            

The Fisher HD™ Snowplow

Call us for Pricing and Details 800-639-2037

When the pros are looking for a straight blade with real earning power, they turn to the rugged FISHER® HD Series more than any other snowplow in the FISHER line.  With 7 ½’, 8’, 8 ½’ and 9’ options, there’s a tough HD ready to meet the demands of even your most punishing commercial applications.

 

Designed for ½-, ¾- and 1-ton four-wheel drive trucks, as well as today’s 15,000 GVW Super Duty vehicles, these snowplow blades are 29” high and built with the heavy 11 gauge steel (12 gauge steel for the 7 ½' blade). Available in 7 ½’, 8’, 8 ½’ and 9’  widths. The full base angle does not require a cutting edge, allowing for more wear. Eight vertical ribs provide superior moldboard reinforcement.
  • With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
  • With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range.
  • In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.

 

Instead of relying on outside suppliers, we build all our hydraulics ourselves, for unmatched speed and durability. Fast responsive hydraulics maximize snowplowing efficiency. 
The industry’s best protection against wear and rust. With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. We’ve added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance. Plus our trademark FISHER®  yellow finish is reformulated to maintain that new snowplow look even longer.

 

 

 

Specifications for Fisher HT Series Snowplow.

Blade Width Blade Height Gauge Trip Springs Ribs Angling Rams Plowing Width
(Full Angle)		 Approx. Weight (Complete) Wear Shoes
(Cast Iron)		 Cutting Edge
7' 6" 29" 12 3 8 1 1/2" x 12" 6' 7" 630 lbs. Standard 3/8" x "
or 1/2" x 6"
8' 29" 11 4 8 1 1/2" x 12" 7' 1" 717 lbs. Standard 1/2" x 6"
8' 6" 29" 11 4 8 1 1/2" x 12" 7' 6" 731 lbs. Standard 1/2" x 6"
9' 29" 11 4 8 1 1/2" x 12" 7' 11" 745 lbs. Standard 1/2" x 6"