 |
|
 |
|
Sales, Service, Parts, &
Accessories
Route 5 Bellows Falls Vt.
|
|
| |
Big trucks and big jobs require serious snowplowing equipment.
The FISHER® MC Series is the biggest toughest plow we make.
Built for municipal and contractor vehicles in the 17,000-27,500 GVW range, the MC Series is just right for narrow streets and intersections
and large parking lots. Matching the plow to the job – that’s how to get it done!
|
- Available in 9’ and 10’ blade widths, the MC Series snowplow is a full 34” high and made from 11 gauge steel.
- The 9’ blade features two wear-resistant cast iron shoes and four compression type trip springs.
- The 10’ blade has four cast-iron shoes, and six compression type trip springs.
- Eight vertical ribs provide structural reinforcement.
- An 8” center punched reversible cutting edge is standard on both sizes. The cutting edge increases wear resistance and improves cutting power and scraping ability.
|
|
- With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
- With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range.
- In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.
|
 |
|
Instead of relying on outside suppliers, we build all our hydraulics ourselves, for unmatched speed and durability. Fast responsive hydraulics maximize snowplowing efficiency. |
|
The industry’s best protection against wear and rust. With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. We’ve added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance. Plus our trademark FISHER® yellow finish is reformulated to maintain that new snowplow look even longer. |
|
Hand-held control with backlit directional buttons provides precise response. Choose between the convenient hand-held Fish-Stik® control with power “on” and “float” LED and automatic shut-off, or the compact joystick control. |
 |
- The state-of-the-art reflector optics provide a smooth wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall.
- 1,500 hour, H I 3, long-life headlamp bulb minimizes bulb replacement over the life of the lamp.
- Three-screw bulb access cover attachment and twist-in headlamp bulb makes replacement quick and easy.
- Lens is adhesive bonded to the reflector and the reflector is adhesive bonded to the housing, sealing out water that could potentially freeze and damage the assembly.
- Robust, two-stud mounting keeps the lamp in its original mounting position – even when subjected to the harshest shock and vibration forces.
|
 |
|
|
Specifications
for Fisher MC Series Snowplow.
| Blade Width |
Blade Height |
Gauge |
Trip Springs |
Ribs |
Angling Rams |
Plowing Width
(Full Angle) |
Approx. Weight (Complete) * |
Wear Shoes
(Cast Iron) |
Cutting Edge |
| 9' |
34" |
11 |
4 |
8 |
2" x 16" |
7' 11" |
1350 lbs. |
Standard |
1/2" x 8" |
| 10' |
34" |
11 |
6 |
8 |
2" x 16" |
8' 10" |
1428 lbs. |
Standard |
1/2" x 8" |
|
* Plus Vehicle Mount – Average 184 lbs. |
|
|
