Ideal for standard-duty commercial and institutional plowing, the SD Series snowplow is built to fit a wide range of vehicles and deliver a perfect balance of performance and versatility. Available in 6’9” and 7’6” widths, these blades are a full 26” high and made of 14 gauge steel.

The SD Series straight blades come standard with a ½ base angle and 1” x 6” polymer cutting edge to increase wear resistance and improve cutting power and scraping ability without adding excess weight. The tough polymer material also helps absorb plowing shock.

• The Chain Lift System
  • With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
  • With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the snowplow up as far as the limits of the cylinder’s range.
  • In the rare event of a hydraulic failure, you can push the snowplow up into a snow bank and “short chain” the snowplow by attaching it to the specially designed bracket and safely transport the snowplow back to the shop.
• Trip-Edge Design
  • Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the blade stays upright, plowed snow remains in front of the blade. Fisher Engineering’s trip edge uses compression-type springs. They never need adjusting and are never stretched like extension springs, providing the longest life of any type of spring on the market.
• In-Cab Controls
  • Hand-held control with backlit directional buttons provides precise response. Choose between the convenient hand-held Fish-Stik® control with power “on” and “float” LED and automatic shut-off, or the compact joystick control.

• Minute Mount® 2 System
  • The simplest and most trouble-free attachment system available.
  • 100% mechanical design means there are no electrical components or hydraulic assist gimmicks to fail.
  • The attachment arms and lower gear are flared both vertically and horizontally to make the drive-in connection easy.
• INTENSIFIRE™ Lights
  • The state-of-the-art reflector optics provide a smooth wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall.
  • 1,500 hour, H I 3, long-life headlamp bulb minimizes bulb replacement over the life of the lamp.
  • Three-screw bulb access cover attachment and twist-in headlamp bulb makes replacement quick and easy.
  • Lens is adhesive bonded to the reflector and the reflector is adhesive bonded to the housing, sealing out water that could potentially freeze and damage the assembly.
  • Robust, two-stud mounting keeps the lamp in its original mounting position – even when subjected to the harshest shock and vibration forces.

Specifications for Fisher SD Series Snowplow.